The Enerzone Destination 2.3 wood insert is cast iron and has a smooth contemporary surround. It is designed for a flush finish designed to be installed in a masonry fireplace. An optional backing plate is available for larger masonry openings.

Maintenance of electrical components was made easy with the conception of a drawer-like system to which the blower assembly attaches. The heat activated blower assembly (90 CFM) can be operated in automatic, manual or OFF mode.

The Destination 2.3-I burns up to 75,000 BTUs and heats up to 2,100 square feet. The Destination 2.3-I has 69% HHV efficiency and produces up to 8 hours of heat from a single load of wood.

New 2020 EPA regulations require wood burning heaters to emit less than 2 grams/hour of soot. The EPA certified Destination 2.3-I is a clean burning wood insert, with only 1.54 g/hr of particulate emissions.

The fireplace has always been the heart of the living room. A unifying element, to this day it is still one of the most coveted home features of previous generations as well as those to come.

Designed to fulfill your expectations, the Enerzone Solution 2.5 ZC II clearly stands out from other fireplaces. Endowed with exceptional performance and efficiency that is far ahead of the competition. With the consumer for whom wood is a clean and renewable source of heating in mind, Enerzone designers created this non-catalytic unit that truly stands out. Experience wood heating in its most complete form.

The Solution 2.5 ZC II burns up to 80,000 BTUs and heats up to 2,200 square feet. The Solution 2.5 ZC II has 68% HHV efficiency and produces up to 8 hours of heat from a single load of wood.

New 2020 EPA regulations require wood burning heaters to emit less than 2 grams/hour of soot. The EPA certified Solution 2.5 ZC II is a clean burning wood fireplace, with only 1.14 g/hr of particulate emissions.